$1.00 off
$22.00 off
$48.00 off
$19.00 off
$8.00 off
$8.00 off
Nanlite
PavoTube Double Bank 2 T12 LED Tube Mount with Gooseneck and 5/8in Receiver
Regular price $79.00Unit price
$8.70 off
$16.00 offBenro
Benro GSC290 GoCoupler 2 | 90¼, 1/4-20 & 3/8" Mount
Sale price $50.95 Regular price $66.95Unit price
$14.00 offBenro
GSC190 GoCoupler 1 | 90¼ 1/4-20 & 3/8" Mount
Sale price $45.95 Regular price $59.95Unit price
$13.00 off
$13.00 offBenro
Benro GSC200 GoCoupler 2 | 0¼, 1/4-20 & 3/8" Mount
Sale price $42.95 Regular price $55.95Unit price
$19.00 off
Clamps, Arms & Mounts for Camera Rigs & Studio Builds
Every production rig depends on reliable clamping and mounting hardware. From magic arms holding a monitor to spring clamps securing a bounce card to a C-stand, the right clamp keeps your gear exactly where you positioned it — through takes, wind, and the occasional accidental bump. Impulse Cameras stocks the grip and rigging hardware professionals trust, available at our Milwaukee store and online.
Buying Guide: Clamps, Arms & Mounts
Magic Arms & Articulating Arms
Magic arms (also called articulating arms) are multi-joint arms with a single central tightening knob that locks all joints simultaneously. They're the fastest way to position a monitor, light, or microphone at any angle without multiple wrench adjustments. Look for arms rated for the weight of your accessory — a 7-inch monitor needs more arm rigidity than a small microphone. Smallrig, Kupo, and Noga make popular options at different load ratings.
Super Clamps & C-Stand Knuckles
Super clamps (also called multi-clamps or spigot clamps) attach to round tubes, square bars, and pipes up to about 50mm diameter. They accept a 5/8" spigot for mounting on C-stand arms or connecting two C-stands together. They're the universal connector of professional grip — use them to mount lights to scaffolding, secure reflectors to pipes, or attach accessories to set rails. Matthellini clamps (spring-loaded with a stud) are the faster-deploying version for lighter-duty use.
Ball Heads & Friction Arms for Accessories
A ball-head-style cold shoe mount lets you angle a microphone or monitor independently of the camera. Friction arms with cold shoe or 1/4-20 ends give you articulation without the bulk of a full magic arm — useful for positioning a small on-camera light slightly off-axis, or tilting a monitor toward the director's chair. Look for a locking mechanism that holds under the weight of the accessory without creeping.
Suction Cup Mounts & Vehicle Mounting
Heavy-duty suction cup mounts attach cameras and action cams to car hoods, windows, and smooth painted surfaces. Professional-grade cups (like the Noga or Tilta vehicle mounts) hold multi-kilogram loads at highway speeds. For lighter GoPro-style cameras, consumer suction mounts are adequate; for a cinema camera, use a rated dual-cup arm system with safety lines as backup.
What is a magic arm used for?
A magic arm is an articulating arm that positions accessories — monitors, lights, microphones, reflectors, or small cameras — at any angle on a C-stand, light stand, cage, or railing. A single central knob locks all joints at once, making repositioning fast. Common uses: holding a director's monitor on a C-stand, positioning a bounce card next to a subject, or mounting a small LED panel where a light stand won't fit.
What's the difference between a super clamp and a C-clamp?
A super clamp grips round or square bars up to about 50mm in diameter using a ratcheting jaw — it's the standard in professional grip for attaching accessories to scaffolding, stand arms, and set rails. It accepts 5/8" spigots for further mounting. A C-clamp (furniture-style) uses a threaded screw mechanism and is slower to attach. For production work, super clamps are far faster and more versatile.
Can I mount a monitor with a magic arm?
Yes, but check the arm's weight rating. A 5-inch monitor (200-300g) works with most standard magic arms. A heavier 7-inch monitor (500-700g) needs an arm rated for at least 1kg to prevent creep over time. Some magic arms are specifically designed for monitor mounting with longer reach and heavier-duty locking mechanisms.
What clamps work with SmallRig and Tilta cages?
Most SmallRig and Tilta cages use standard cold shoe mounts, 1/4-20 threads, and NATO rails. Cold shoe accessories click in tool-free. Arms with 1/4-20 or 3/8" screws mount to any threaded hole in the cage. NATO rail clamps (for monitors, handles, and arms) slide onto the rail and lock with a thumbscrew. This standardized ecosystem means most accessories from any brand mount to any cage.
Are spring clamps strong enough for studio use?
Matthellini-style spring clamps with 5/8" studs (also called grip heads) are rated for several kilograms and are used by professional grips on set every day. Standard plastic spring clamps are suitable only for lightweight paper, fabric, or flags. For anything heavier than a bounce card, use a proper grip head with a locking mechanism rather than a spring clamp.
Visit Us in Milwaukee — Bring your rig in and we'll help you find the right clamp, arm, or mount for your specific build, or email sales@impulsemke.com with your setup details.
